Legiones Astartes – Garviel Loken
- Garviel Loken 175 Points
Captain of the 10th Company, New-moon of the Mournival, The Last Wolf of Luna
UNIT COMPOSITION: 1 GARVIEL LOKEN
Garviel Loken was one of the senior captains of the Luna Wolves Legion (later the Sons of Horus) during the latter part of the Great Crusade. Highly regarded as a warrior and commander by both his brethren and his Primarch, admired for his cool head and intelligence as well as his record in battle, he was given the honour of induction into the Mournival, his Legion cadre of close advisors to their Primarch. However, after Horus’ fall on Davin, he was considered too loyal to the old way—the ideals of the Great Crusade and the Emperor, to be inducted into the dark conspiracy that was overtaking his beloved Legion. Assigned to lead the Sons of Horus contingent attack in the first wave, he rose swiftly to the mantle of leadership, he and his command casting aside the identity of the Sons of Horus, and proclaiming themselves Luna Wolves once more, extracting a heavy toll of dead on those they had once called brother.
| LD | CL | WP | IN | |||||||||||
| M | WS | BS | S | T | W | I | A | LD | CL | WP | IN | SAV | INV | |
| Garviel Loken (⌀32mm) | 10 | 9 | 9 | 9 | ||||||||||
| Garviel Loken (⌀32mm) | 7 | 6 | 5 | 4 | 4 | 4 | 5 | 5 | 10 | 9 | 9 | 9 | 2+ | 4+ |
WARGEAR
- Paragon blade
- Bolt pistol
- Frag grenades
- Krak grenades
TRAITS
- Loyalist
- Sons of Horus
- Master of the Legion
SPECIAL RULES
- Hatred (Traitor)
- Born Survivor
TYPE
- Infantry (Unique, Command)
SPECIAL RULES
Born Survivor
Garviel Loken was driven to a quiet fury by his Primarch’s betrayal. In the wake of the Isstvan 111 betrayal, he swore he would not allow himself to be laid low before every one of his treacherous brethren was slain.
This Special Rule allows Garviel Loken to avoid being Removed as a Casualty.If the Wounds Characteristic of a Model with this Special Rule is reduced to 0 or less, the Controlling Player can roll one Dice. On a 4+, this Model is not Removed as a Casualty and has its current Wounds Characteristic set to ‘1’.
Leadership (LD) – The Leadership Characteristic is primarily used to resolve Checks to determine when a Unit will stand its ground or flee. For more details see the Combat Resolution Rules. When a Model’s Leadership Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Leadership of 0 but uses a Model with a higher value to make a Panic or Leadership Check suffers no penalties.
Cool (CL) – The Cool Characteristic is primarily used to resist Statuses. For more details see the Rules for Tactical Statuses. When a Model’s Cool reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Cool of 0 but uses a Model with a higher value to make a Cool Check suffers no penalties.
Willpower (WP) – The Willpower Characteristic is primarily used for Checks made for Psychic Attacks or Powers. For more details see the Rules for Psychic Powers. When a Model’s Willpower Characteristic reaches 0, any Check it is used to determine the Target Number for, automatically fails with no Dice rolled. However, a Unit that includes one or more Models with a Willpower of 0 but uses a Model with a higher value to make a Willpower Check suffers no penalties.
Intelligence (IN) – The Intelligence Characteristic is primarily used for Checks to activate certain Wargear items and Rules. When a Model’s Intelligence Characteristic reaches 0, any Check it is used to determine the Target Number for automatically fails with no Dice rolled. However, a Unit that includes one or more Models with an Intelligence of 0 but uses a Model with a higher value to make an Intelligence Check suffers no penalties.
Movement (M) – The Movement Characteristic is primarily used to determine how far a Model can move during the Movement Phase, with higher values denoting an ability to move further (see Moving Units). If a Model’s Movement Characteristic is reduced to 0, then the Controlling Player may not move, Rush or otherwise change the Model’s position on the Battlefield regardless of any other Rules that may affect it until its Movement is changed to a value greater than 0.
Weapon Skill (WS) – The Weapon Skill Characteristic is primarily used to determine a Model’s ability to attack during a Combat in the Assault Phase, with a higher value making it both easier for the Model to make attacks and more difficult for opponents to do so (see Melee Hit Tests). If a Model’s Weapon Skill is reduced to 0 then that Model cannot make attacks in a Combat (if the Hit Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Enemy Models whose attacks target a Model with Weapon Skill 0, or a Unit whose majority Weapon Skill is 0, treat the Target Model as though it had a Weapon Skill of T to determine the Target Number for any Hit Tests required.
Ballistic Skill (BS) – The Ballistic Skill Characteristic is primarily used to determine a Model’s ability to make attacks during a Shooting Attack, with a higher value making it easier to succeed at attacks (see Ranged Hit Tests). If a Model’s Ballistic Skill is reduced to 0 then that Model cannot make Shooting Attacks, even if no Hit Test is required or it would have otherwise automatically succeeded due to the use of a Special Rule.
Strength (S) – The Strength Characteristic is primarily used to determine the effectiveness of Wound Tests inflicted by Melee Weapons, with a higher value making it easier to inflict wounds. If a Model’s Strength Characteristic is reduced to 0 then any Wound Tests made that would use that Characteristic or for any Melee Weapon automatically fails and no Dice are rolled for it (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Toughness (T) – The Toughness Characteristic is primarily used as part of Wound Tests, with a higher value making it harder for attacks to inflict wounds on a Target Unit or Model. If a Model is reduced to 0 Toughness then all Wound Tests made targeting it are automatically successful and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to have been automatically activated as part of the Test).
Wounds (W) – The Wounds Characteristic is primarily used to determine a Model’s capacity for receiving Damage during a Battle, with a higher value allowing a Model to sustain more damage before it is removed from play. When a Model’s Wounds Characteristic is reduced to 0 that Model is Removed as a Casualty, see the Rules for Casualties here.
Initiative (I) – The Initiative Characteristic is primarily used to determine the order in which Models make attacks during Combat, with Models with a higher Initiative Value making attacks before those with lower values. For more details, see the Set-up Move Distance for the Assault Phase. When a Model’s Initiative Characteristic is reduced to 0, then that Model will generally be forced to attack after other Models, but suffers no other penalty.
Attacks (A) – The Attacks Characteristic is primarily used to determine the number of attacks a Model may make in a Combat, with the value of the Characteristic indicating the number of attacks that can be made (see Melee Hit Tests). When a Model’s Attacks Characteristic is reduced to 0 then that Model may not make any attacks as part of a Combat.
Armour Save (SAV) – An Armour Save is used to attempt to negate wounds suffered by a Model. When a Model’s Armour Save is at its minimum value of ‘-’, that Model may not make Armour Tests.
Invulnerable Save (INV) – An Invulnerable Save is used to negate wounds that would normally ignore or bypass an Armour Save. When a Model’s Invulnerable Save is at its minimum value of ‘-’, that Model may not make Invulnerable Tests.
Range (R) – This Characteristic determines the maximum distance, in inches ("), at which attacks may be made with a Weapon. A Weapon with Range 0 or ‘-’ may not make attacks as part of a Shooting Attack.
Firepower (FP) – This Characteristic is used to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with a Firepower Characteristic of 0 may not be used to make attacks of any kind.
Ranged Strength (RS) – This Characteristic is used only during Wound Tests or Armour Penetration Tests for attacks made using ranged Weapons. If a Weapon has a Strength Characteristic of ‘0’ or then any Wound Tests made for it automatically fail and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test).
Armour Penetration (AP) – This Characteristic is used to determine if a Model Hit by attacks made with a Weapon may make an Armour Test. Like Saving Throws, lower values are more valuable for this Characteristic. When modifying the Armour Penetration Characteristic the same Rules are used as those for modifying Saving Throws.
Damage (D) – This Characteristic determines how the Wounds or Hull Points Characteristic of a Target Model that fails a Saving Throw after sustaining a wound from a Weapon is modified. A Weapon with a Damage Characteristic of 0 cannot inflict Damage on a Model, regardless of the Weapon’s other Characteristics or Special Rules.
Rules and Special Rules
The term Rule refers to any instructions that allow Players to resolve game actions as part of a Battle, covering all of the interactions between Models and Units (such as moving, Shooting and making Assaults). All of the material in the Principles of Combat, Rules of Battle and Battles in the Age of Darkness sections of this book are considered to be Rules. Special Rules modify how a Rule works, but do not present new basic game instructions, and in this book are mostly found in the Armoury of the Age of Darkness section. In all cases, Special Rules take precedence over Rules where the two present differing instructions.
Traits
Traits are a special kind of Characteristic, one which all Models have but which confers no inherent Rules or benefit on its own. Instead, Traits are used by other Special Rules and effects to target specific Models and apply benefits or penalties. The most common Traits are those for Allegiance and Faction, which are possessed by almost all Models. Allegiance requires that each Model have either the Loyalist or Traitor Trait, and most Models will gain one or more Traits based on the Army List from which they were selected.For example, a Legionary selected from the Imperial Fists Faction and selected as part of a Loyalist Army would have the Loyalist and Imperial Fists Traits. On their own these Traits have no effect on the Model’s Characteristics, Points cost or other features, but Rules that target Imperial Fists or Loyalist Models will apply their effects to the Model.
In addition to Models, Weapons can also have Traits. These are usually different to those possessed by Models, but are used for the same purposes. Weapons will commonly have Traits that define the type of Weapon it is or a specific type of usage. For example, a bolt pistol has the following Traits: Assault, Bolt. These identify which ‘family’ of Weapons it belongs to for any Rules that might only affect ‘Bolt’ Weapons and notes that it can be used for attacks where only ‘Assault’ Weapons may be used.
While they appear similar to Characteristics, it is important to note that Traits never have a ‘value’ attached to them. Furthermore, Traits cannot be modified in any way by another Special Rule or effect during a Battle, unless a Rule specifically states it affects a Trait.
Pistol
Compact and deadly, pistols are ideal weapons in close quarters. They lack the sheer range of larger weapons, but can be brought to bear with impressive speed and are no less deadly than their larger counterparts.
A Model may attack with two Weapons that have the Pistol Special Rule.During Step 3 of any Shooting Attack, a Player may choose to have a Model under their control make attacks with two Weapons rather than one if both Weapons have the Pistol Special Rule.
Bolt pistol
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Bolt pistol | |||||||
| Bolt pistol | 12 | 1 | 4 | 5 | 1 | Pistol | Assault, Bolt |
Shooting Attacks
A Shooting Attack is the process by which a Unit makes a coordinated series of attacks targeting an enemy Unit.In order to make a Shooting Attack for a Unit that has been selected during the Attack Sub-Phase, as part of a Reaction or for any other Rule or Sub-Phase that requires a Shooting Attack to be made, the following procedure must be followed:
As part of the Rules for conducting a Shooting Attack, the term ‘Attacking Unit’ will be used to refer to the Unit whose Models will be making attacks as part of that Shooting Attack, while the term ‘Attacking Player’ will be used to identify the Player that controls the Attacking Unit. The term ‘Target Unit’ will be used to refer to the Unit that is selected as the Target Unit for the Shooting Attack.
Blast (X)
Some weapons trade precision for indiscriminate destruction, high explosive impacts that can devastate a wide area. From artillery shells to high energy blasts, such weapons are popular tools of destruction on the battlefields of the Horus Heresy.
Attacks made with the Blast (X) Special Rule use a Blast Marker to determine how many Hits are caused.When making attacks with a Weapon that has the Blast (X) Special Rule, before any Hit Tests are made, a Blast Marker must first be placed to determine how many Hits may be inflicted by the attack. The Player making the attack must place the Blast Marker indicated in brackets as part of the Special Rule so that the hole in the middle is entirely over the Base of any one Model in the Target Unit. Once the Blast Marker has been placed, the Player making the attack must make a Hit Test for the attack, and each Model from the Target Unit that is fully or partially under the Blast Marker will suffer 1 Hit if the Hit Test is successful.
Hits on Other Units
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.
If any Models from Units other than the Target Unit are fully or partially covered by the Blast Marker, then a new Fire Group must be created for those Hits and set to one side. Continue resolving the Shooting Attack on the original Target Unit, and once that Shooting Attack has been completely resolved begin a new Shooting Attack to resolve those additional Fire Groups generated for Units other than the original Target Unit.
If the Hit Test is unsuccessful then no Hits are inflicted and the Player making the attack must make a Scatter Roll for the Blast Marker. Once a Scatter Roll has been made for the Blast Marker and it has been moved, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker.
Hits can be scored on both friendly and enemy Units by attacks using the Blast (X) Special Rule. Hits inflicted by Weapons with the Blast (X) Special Rule are allocated in the same manner as other Hits, regardless of which actual Models were under the Blast Marker and the Blast Marker may not be used to inflict Hits on specific Models.
If a Fire Group includes multiple attacks made with the Blast (X) Special Rule, do not place multiple Blast Markers. A single Blast Marker is placed using the Rules detailed above, and a Hit Test is made for each attack in that Fire Group. For each successful Hit Test, one Hit is inflicted for each Model from the target Unit that is fully or partially under the Blast Marker. If any Hit Tests are unsuccessful then, after any Hits made by successful Hit Tests are counted, a single Scatter Roll is made for the Blast Marker, regardless of the total number of unsuccessful Hit Tests. For each Hit Test that was unsuccessful, one Hit is inflicted on a Unit for each Model from that Unit that is wholly or partially covered by the Blast Marker after the Scatter Roll has been resolved.
Initiative Modifier (IM) – This Characteristic is applied as a modifier to a Model’s Initiative Characteristic to determine that Model’s Combat Initiative. A Weapon with an Initiative Modifier of 0 forces the Model attacking with it to set their Combat Initiative to a value of 0. Furthermore, a Weapon with an Initiative Modifier of ‘1’ imposes no modifier to the Initiative Characteristic of a Model.
Attacks Modifier (AM) – This Characteristic is applied as a modifier to a Model’s Attacks Characteristic to determine how many Dice are rolled when making attacks with this Weapon. A Weapon with an Attacks Modifier Characteristic of 0 may not be used to make attacks during the Fight Sub-Phase. Furthermore, a Weapon with an Attacks Modifier of ‘A’ imposes no modifier to the Attacks Characteristic of a Model.
Strength Modifier (SM) – This Characteristic is applied as a modifier to a Model’s Strength Characteristic to determine the Strength used to make Wound Tests in Combat. A Weapon with a Strength Modifier Characteristic of 0 automatically fails any Wound Tests during the Fight Sub-Phase and no Dice are rolled (if the Wound Test could have triggered a variable Special Rule, then that Rule is considered to automatically fail to activate as part of the Test). Furthermore, a Weapon with a Strength Modifier of ‘S’ imposes no modifier to the Strength Characteristic of a Model.
Fall Back – All Models in the Unit gain the Routed Status if they did not already have it. Units with the Routed Status must then make an immediate Fall Back Move.
LOCKED IN COMBAT – If the Assault Sequence ends and at least one Target Unit has neither been forced to Fall Back or been entirely Removed as Casualties, then the Units involved remain in place with at least one Model from each Unit in Base-to-Base Contact with an enemy Model. These Units are ‘Locked in Combat’ and may not be selected or moved in the Movement Phase or selected to make Shooting Attacks in the Shooting Phase. They may be selected during the Fight and Challenge Sub-Phases of the Assault Phase by the Active Player, but may not make a Charge or otherwise be selected in the Charge Sub-Phase.
Detonation
Designed to be carefully attached to a target and blast precise holes in the thickest armour, these cumbersome devices are ill-suited to open war. However, when a vulnerable target can be isolated in battle, there are no better tools for piercing its protection.
Weapons with this Special Rule can only attack Vehicles and immobile Models.A Weapon or attack with this Special Rule may only be selected during Step 2 of any Combat in the Fight Sub-Phase if the Unit making attacks is only Locked in Combat with enemy Units composed of Models with the Vehicle Type and Models with a Movement Characteristic of ‘0’ or ‘-’. If a Unit is Locked in Combat with any enemy Units that include any Models that do not have the Vehicle Type or a Movement Characteristic of ‘0’ or ‘-’ then no Model may use a Weapon or other attack that has this Special Rule.
A Weapon or other attack with this Special Rule may also be used to make attacks targeting a Model with the Building Type or a Terrain Piece that has a Toughness or Armour Characteristic.
Krak grenades
| Melee Weapon | |||||||
Melee Weapon | IM | AM | SM | AP | D | Special Rules | Traits |
| Krak grenades | |||||||
| Krak grenades | -3 | 1 | 6 | 4 | 2 | Detonation | - |
Infantry
Infantry units include all types of foot soldiers. Infantry are fairly slow moving, but can cross almost any terrain and make the best use of cover to avoid enemy fire.
Infantry is the most basic Type, and is applied to most Models in the game. A Model with the Infantry Type uses the Core Rules without modification, gaining neither benefit nor penalty. Models with the Infantry Type may Embark and Disembark upon Models with the Transport Sub-Type.COMBAT – A Combat is a reference to two or more Units conducting an ongoing struggle, where at least one Model from each Unit is in Base-to-Base Contact. Outside of the Assault Phase, a Combat is considered one entity and no other Unit may move through it or end a move within 1" of any Model in the Combat. No Unit in a Combat may be the target of any Shooting Attack.
ENGAGED
A Model is Engaged if either:
A Model is Engaged if either:
- That Model is in Base Contact with an enemy Model in the same Combat.
- That Model is no more than 2" from another Model in the same Unit which is in Base Contact with an enemy Model.
Critical Hit (X)
Whether by dint of superior skill or exemplary wargear, some warriors are better able to place strikes on enemy weak points. Such attacks can fell even the most powerful foes with a single well-placed shot.
Attacks made with the Critical Hit (X) Special Rule have a chance to automatically cause a wound and inflict 1 extra point of Damage.When any Hit Test is made for an attack with the Critical Hit (X) Special Rule, if the result of the Dice roll, before any modifiers are applied, is equal to or greater than the value of X attached to this variant of the Critical Hit (X) Special Rule, then if a Hit is inflicted by that Hit Test, that Hit becomes a ‘Critical Hit’.
A Critical Hit automatically inflicts a wound without any Dice being rolled, counting as the roll of a ‘6’ for any variable Special Rules that might be triggered by a Wound Test, and increases the Damage Characteristic of the Hit by +1.
Army List
Datasheets collatedFaction Rules
• Wargear
Frag Grenades
This class of grenade contains only a small explosive charge, and is intended primarily to disorientate and distract the foe while closing on a fixed position.
Frag grenades can be used to make attacks during the Volley Step.When making Volley Attacks during Step 4 of the Charge Procedure with a Unit that includes at least one Model with frag grenades, the Controlling Player may choose to make a single attack with a frag grenade instead of making a normal Shooting Attack using the following profile:
| Ranged Weapon | |||||||
Ranged Weapon | R | FP | RS | AP | D | Special Rules | Traits |
| Frag Grenades | |||||||
| Frag Grenades | 6 | 1 | 3 | 6 | 1 | Blast (3") | Assault |
The Loyalist Trait is used in the following Legiones Astartes datasheets:
The Master of the Legion Trait is used in the following Legiones Astartes datasheets:
Warlord
High Command
• Praetor
Unique
Among the warriors and war machines of the Horus Heresy there are many whose names are known throughout the galaxy. Such heroes, prototypes and icons are rare, and though their power can tip any battle in their favour, they can only be in one place at a time.
The following Rules apply to all Models with the Unique Sub-Type:- An Army may not include more than a single instance of a given Model with this Sub-Type. For example, if Model A and Model B both have the Unique Sub-Type then a single Army could include one of Model A and one of Model B, but no more than one of either Model.
- A Model with the Unique Sub-Type or a Unit composed entirely of Models with the Unique Sub-Type may not have any options other than those included on its Army List Profile selected for them.
Player
A Player is the actual person moving Models and making rolls, the Player of the game. Battles will include more than one Player, and the Rules will often refer to the Active Player (the Player currently taking their Player Turn) and the Reactive Player (the Player not currently taking their Player Turn, and thus only allowed to interact with the game through Reactions) in order to differentiate between them. Sometimes the Rules will also refer to the Controlling Player, that is the Player that Controls the Unit, Model or other game element the Rule is referring to.
Command
Representing the elite of any army, commanders oversee the disposition of their troops, set strategy for the coming battle and often stand at the forefront of the conflict. The actions of such heroes can change the tide of battle in an instant.
The following Rules apply to all Models with the Command Sub-Type:- A Model with the Command Sub-Type may join and leave Units.
- A Model with the Command Sub-Type may Issue and Accept Challenges.
- The Controlling Player of a Unit that includes one or more Models with the Command Sub-Type may use the Characteristics of one of those Models to resolve any Characteristic Checks made for that Unit.
This datasheet has High Command Battlefield Role. Full list of Legiones Astartes units sharing same Battlefield Role follows:
High Command
• Praetor
Hatred (X)
Hatred can be a force as potent as any munition, driving troops to fight harder and more ferociously. The Horus Heresy would stoke old hatreds and spawn many new ones, granting canny commanders ample opportunity to set troops against their chosen foes.
The Hatred (X) Special Rule grants bonuses against enemies of a specific Faction, Type or Trait.When Locked in Combat, or Engaged in a Challenge, with any enemy Models that have the Type or Trait that is the value of X, then all Models with this variant of the Hatred (X) Special Rule gain a bonus of +1 to all Wound Tests made in that Combat.
Removed as a Casualty
A Model Removed as a Casualty is directly removed from the Battlefield, without disturbing the position of any other Model or Terrain Piece. Once removed from the Battlefield it should be placed in a location distinct from Models in Reserves and outside the bounds of the Battlefield. Once Removed as a Casualty a Model may not be returned to the Battlefield and all Rules or effects targeting or originating with that Model end immediately and have no further effect. No Rule or effect may draw Line of Sight or Range to a Model that has been Removed as a Casualty for any reason. If a Model with the Transport Sub-Type is Removed as a Casualty while Models are Embarked upon it, then before the Model with the Transport Sub-Type is removed all Models Embarked upon it must immediately make an Emergency Disembarkation.A number of Rules, including Tactical Statuses and Victory Conditions are triggered by the removal of Models as Casualties, and as such all Players should be made aware of any Models that are Removed as Casualties. Furthermore, any Player may request to see which Models have been Removed as Casualties by any Player at any point during the Battle.
The Sons of Horus Trait is used in the following Legiones Astartes datasheets:
Paragon blade
| Melee Weapon | |||||||
Melee Weapon | IM | AM | SM | AP | D | Special Rules | Traits |
| Paragon blade | |||||||
| Paragon blade | I | A | +1 | 2 | 1 | Critical Hit (6+) | - |
Born Survivor
Garviel Loken was driven to a quiet fury by his Primarch’s betrayal. In the wake of the Isstvan 111 betrayal, he swore he would not allow himself to be laid low before every one of his treacherous brethren was slain.
This Special Rule allows Garviel Loken to avoid being Removed as a Casualty.If the Wounds Characteristic of a Model with this Special Rule is reduced to 0 or less, the Controlling Player can roll one Dice. On a 4+, this Model is not Removed as a Casualty and has its current Wounds Characteristic set to ‘1’.