Cities of Sigmar – Dark Riders
12" 3 4+ 1 For those marked by the Dark Riders, there is nowhere to flee. These cloaked killers gallop forth upon red-eyed shadowmares, levelling spears and repeater crossbows to deal a fatal blow to their quarry. | ||
| RANGED WEAPONS | Rng | Atk | Hit | Wnd | Rnd | Dmg | ||
| Repeater Crossbow [Crit (2 Hits)] | ||||||||
| Repeater Crossbow Crit (2 Hits) | 12" | 2 | 4+ | 4+ | - | 1 | ||
| MELEE WEAPONS | Atk | Hit | Wnd | Rnd | Dmg | |||
| Barbed Spear [Anti-INFANTRY (+1 Rend)] | ||||||||
| Barbed Spear Anti-INFANTRY (+1 Rend) | 2 | 3+ | 4+ | 1 | 1 | |||
| Dark Steed’s Vicious Bite [Companion] | ||||||||
| Dark Steed’s Vicious Bite Companion | 2 | 5+ | 3+ | - | 1 | |||
BATTLE PROFILE
Unit Size: 5 Points: 170
Base size: 60 × 35mm
Can be reinforced: Yes
Notes: This unit will move to Warhammer Legends on 1 June 2027.
 Once Per Turn (Army), End of Any Turn |
SOW HAVOC: The speed and discipline of the Dark Riders is unmatched, allowing them to charge the enemy’s weak points and retreat before the foe can react.
Declare: Pick an enemy unit in combat with this unit to be the target.
Effect: Roll a dice. On a 3+:
Effect: Roll a dice. On a 3+:
- Inflict D3 mortal damage on the target.
- This unit can immediately use the ‘Retreat’ ability as if it were your movement phase without any mortal damage being inflicted on it.
KEYWORDS | CAVALRY, CHAMPION, MUSICIAN (1/5), STANDARD BEARER (1/5) |
| ORDER, CITIES OF SIGMAR, AELF |
17.2 Mortal Damage
Some abilities inflict mortal damage. If an ability inflicts mortal damage on a unit, add that number of damage points to the unit’s damage pool for that ability (see 18.2 Allocating Damage).
 Your Movement Phase |
RETREAT: The fighters disengage from combat, though at the cost of lowering their defences.
Declare: Pick a friendly unit that is in combat to use this ability.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
| KEYWORDS | CORE, MOVE, RETREAT |
7.0 Combat Range
Each model has a combat range that extends 3" horizontally from its base and any distance vertically from that circle to form a cylinder. The combat range of a unit extends 3" horizontally and any distance vertically from every model in that unit. Units from opposing armies that are within each other’s combat range and that are visible to each other are in combat with each other. When a unit that is not in combat enters the combat range of a visible enemy unit, it moves into combat.
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
| ||
FAQ / Errata
FAQ
| Q: | If a model in base-to-base contact with an enemy model retreats 3" directly away from the enemy model, is it still in combat with that enemy model? |
| A: | No. |
Errata
Addenda: 7.0 Combat Range
Add the following:
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
 Passive |
SEED OF REBIRTH: Should the bearer of this seed ever fall, its rejuvenating energies will grant them new life.
Effect: The first time this unit would be destroyed, before removing it from play, roll a dice. On a 3+, this unit is not destroyed and any remaining damage points inflicted on it have no effect. Then, Heal (D3) this unit.
21.0 Healing
Some abilities allow you to heal a unit. To heal a unit, remove a number of damage points from the unit equal to the number in brackets after ‘Heal’, e.g. Heal (2).FAQ
| Q: | If an ability (e.g. ‘Seed of Rebirth’) would allow a unit that would be destroyed to negate all remaining damage points then heal to prevent that unit from being destroyed, and another ability (e.g. ‘Quenching the Flames’) prevents that unit from healing, would that unit still be destroyed? |
| A: | Yes. |
 Any Hero Phase | 1 |
RALLY: With an inspiring call to action, wounded soldiers get a second wind and fresh troops take the field to replace their fallen comrades.
Declare: Pick a friendly unit that is not in combat to use this ability.
Effect: Make 6 rally rolls of D6. For each 4+, you receive 1 rally point. Rally points can be spent in the following ways:
Effect: Make 6 rally rolls of D6. For each 4+, you receive 1 rally point. Rally points can be spent in the following ways:
- For each rally point spent, Heal (1) that unit.
- You can spend a number of rally points equal to the Health characteristic of that unit to return a slain model to that unit.
Companion
Unless otherwise specified, attacks made by this weapon are not affected by friendly abilities that modify hit rolls, wound rolls or weapon characteristics, except for those that apply negative modifiers (e.g. ‘Covering Fire’).7.0 Combat Range
Each model has a combat range that extends 3" horizontally from its base and any distance vertically from that circle to form a cylinder. The combat range of a unit extends 3" horizontally and any distance vertically from every model in that unit. Units from opposing armies that are within each other’s combat range and that are visible to each other are in combat with each other. When a unit that is not in combat enters the combat range of a visible enemy unit, it moves into combat.
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
| ||
FAQ / Errata
FAQ
| Q: | If a model in base-to-base contact with an enemy model retreats 3" directly away from the enemy model, is it still in combat with that enemy model? |
| A: | No. |
Errata
Addenda: 7.0 Combat Range
Add the following:
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
Universal Core Abilities - Movement Phase
| Your Movement Phase |
NORMAL MOVE: The warriors advance across the battlefield.
Declare: Pick a friendly unit that is not in combat to use this ability.
Effect: That unit can move a distance up to its Move characteristic. That unit cannot move into combat during any part of that move.
Effect: That unit can move a distance up to its Move characteristic. That unit cannot move into combat during any part of that move.
| KEYWORDS | CORE, MOVE |
| Your Movement Phase |
RUN: The unit rushes into position.
Declare: Pick a friendly unit that is not in combat to use this ability.
Effect: Make a run roll of D6. That unit can move a distance up to its Move characteristic added to the run roll. That unit cannot move into combat during any part of that move.
Effect: Make a run roll of D6. That unit can move a distance up to its Move characteristic added to the run roll. That unit cannot move into combat during any part of that move.
| KEYWORDS | CORE, MOVE, RUN |
| Your Movement Phase |
RETREAT: The fighters disengage from combat, though at the cost of lowering their defences.
Declare: Pick a friendly unit that is in combat to use this ability.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
| KEYWORDS | CORE, MOVE, RETREAT |
32.2 Objective Control
In the deployment phase after all Deployment Phase abilities have been used and at the end of each turn, follow this sequence for each objective in an order chosen by the active player:- Starting with the active player, each player determines the control score of each of their units that is contesting that objective. A unit’s control score is the combined Control characteristics of all the models in that unit that are contesting the objective. Some abilities modify a unit’s control score, but it cannot be reduced to less than 1.
- Each player adds up the control scores of all of their units contesting that objective. This is their army control score for that objective.
- The players compare their army control scores for that objective. If one player’s score is higher, that player gains control of that objective. Once a player gains control of an objective, it remains under their control until their opponent gains control of it.
| Sometimes objective markers get accidentally nudged while you are moving models around. This is perfectly fine - just remember to put them back in their proper positions when determining objective control. | ||
Errata
32.2 Objective Control
Change the first sentence to:
‘In the deployment phase after all Deployment Phase abilities have been used and at the end of each turn, follow this sequence for each objective in an order chosen by the active player:’
‘In the deployment phase after all Deployment Phase abilities have been used and at the end of each turn, follow this sequence for each objective in an order chosen by the active player:’
1.0 Champions
Units with the CHAMPION keyword have one or more champion models. If there is a number after the CHAMPION keyword, that number indicates the proportion of models in that unit that can be champions. In any other case, 1 model in the unit can be a champion. Units with the CHAMPION keyword have the following passive ability: Passive |
CHAMPION: A veteran fighter leads the charge.
Effect: Add 1 to the Attacks characteristic of weapons used by champions in this unit. If this unit is a BEAST, this ability affects this unit’s Companion weapons.
Errata
Champion
Change the definition of Champion to:
‘Champion: Model’s weapons have +1 to Attacks characteristic. (Command Models, 1.0)’
‘Champion: Model’s weapons have +1 to Attacks characteristic. (Command Models, 1.0)’
Anti-X (+1 Rend)
Add 1 to this weapon’s Rend characteristic if the target has the keyword after ‘Anti-’ or fulfils the condition after ‘Anti-’. Multiples of this ability are cumulative. For example, if a weapon has both Anti-charge (+1 Rend) and Anti-HERO (+1 Rend), then add 2 to the Rend characteristic of the weapon for attacks that target a HERO that charged in the same turn.The ORDER keyword is used in the following Cities of Sigmar warscrolls:
Infantry Hero
Monster Hero
War Machine Hero
Cavalry
Infantry
and others...
The CITIES OF SIGMAR keyword is used in the following Cities of Sigmar warscrolls:
Infantry Hero
Monster Hero
War Machine Hero
Cavalry
Infantry
and others...
Crit (2 Hits)
If an attack made with this weapon scores a critical hit, that attack scores 2 hits on the target unit instead of 1. Make a wound roll for each hit.The CHAMPION keyword is used in the following Cities of Sigmar warscrolls:
Cavalry
Infantry
2.0 Musicians
Units with the MUSICIAN keyword have one or more musician models. The number after the MUSICIAN keyword indicates the proportion of models in that unit that can be musicians. Units with the MUSICIAN keyword have the following passive ability:| Passive |
MUSICIAN: The beat of a drum or the blast of a horn drives the soldiers ever onward.
Effect: While this unit contains any musicians, if it uses the ‘Rally’ command, you can make one additional rally roll of D6.
The MUSICIAN keyword is used in the following Cities of Sigmar warscrolls:
3.0 Standard Bearers
Units with the STANDARD BEARER keyword have one or more standard bearer models. The number after the STANDARD BEARER keyword indicates the proportion of models in that unit that can be standard bearers. Units with the STANDARD BEARER keyword have the following passive ability: Passive |
STANDARD BEARER: The unit’s standard provides a rallying point in the chaos of battle.
Effect: While this unit contains any standard bearers, add 1 to this unit’s control score.
The STANDARD BEARER keyword is used in the following Cities of Sigmar warscrolls:
Cavalry
The AELF keyword is used in the following Cities of Sigmar warscrolls:
Infantry
The CAVALRY keyword is used in the following Cities of Sigmar warscrolls: