Cities of Sigmar – Aqshian Pyrocaster
5" 5 6+ 2 Battlemages who dedicate themselves to the Aqshian school of magic are fiery and aggressive souls. Known as Pyrocasters, they channel the tremendous power of bright magic through their emberstone wands, annihilating their foes in an explosion of flame. | ||
| MELEE WEAPONS | Atk | Hit | Wnd | Rnd | Dmg | ||
| Burning Fists | |||||||
| Burning Fists | 3 | 4+ | 4+ | 1 | D3 | ||
BATTLE PROFILE
Unit Size: 1 Points: 100
Base size: 32mm
Can be reinforced: No
Regiment Options: 0-1 SIGMARITE WAR MACHINE, Any SIGMARITE INFANTRY
Notes: This HERO can join an eligible regiment as a Thaumaturgical Specialist.
 Your Hero Phase | 6 |
INCANDESCENT INCINERATION: The Pyrocaster’s wand glows white hot as they unleash an incendiary assault, the arcane flames creating a veritable bonfire of bright magic for them to tap into.
Declare: Pick a visible enemy unit within 12" of this unit to be the target, then make a casting roll of 2D6.
Effect: If the target was not incandescent when they were picked to be the target of this spell:
If the target was incandescent when they were picked to be the target of this spell:
Effect: If the target was not incandescent when they were picked to be the target of this spell:
- Inflict D3 mortal damage on the target.
- The target is incandescent for the rest of the battle.
If the target was incandescent when they were picked to be the target of this spell:
- Allocate 3 damage points to the target (ward rolls cannot be made for those damage points).
- The target is no longer incandescent.
| KEYWORDS | SPELL |
| Once Per Turn (Army), Your Hero Phase |
THE FLAMES OF AQSHY: The Pyrocaster turns their body into a living conduit for Aqshian magic, heightening their fiery spellcasting.
Effect: Make an arcane manipulation roll of D6. On a 3+, for the rest of the turn, when picking a target for the ‘Incandescent Incineration’ ability, you can pick a visible enemy unit within 18" of this unit instead of within 12".
KEYWORDS | HERO, WIZARD (1), INFANTRY |
| ORDER, CITIES OF SIGMAR, SIGMARITE |
Hit Roll
Roll a dice. If the roll equals or exceeds the attacking weapon’s Hit characteristic, the attack scores a successful hit: move on to the next step. If not, the attack fails and the attack sequence ends. Unmodified hit rolls of 1 always fail. If an unmodified hit roll for an attack made with a weapon is a 6, that attack is a critical hit.| Critical hits have no effect on their own but often trigger additional effects (see 20.0 Weapon Abilities). | ||
Cover
Subtract 1 from hit rolls for attacks that target a unit that is behind or wholly on this terrain feature, unless that unit charged this turn or has the FLY keyword.17.2 Mortal Damage
Some abilities inflict mortal damage. If an ability inflicts mortal damage on a unit, add that number of damage points to the unit’s damage pool for that ability (see 18.2 Allocating Damage).
 Your Movement Phase |
RETREAT: The fighters disengage from combat, though at the cost of lowering their defences.
Declare: Pick a friendly unit that is in combat to use this ability.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
| KEYWORDS | CORE, MOVE, RETREAT |
7.0 Combat Range
Each model has a combat range that extends 3" horizontally from its base and any distance vertically from that circle to form a cylinder. The combat range of a unit extends 3" horizontally and any distance vertically from every model in that unit. Units from opposing armies that are within each other’s combat range and that are visible to each other are in combat with each other. When a unit that is not in combat enters the combat range of a visible enemy unit, it moves into combat.
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
| ||
FAQ / Errata
FAQ
| Q: | If a model in base-to-base contact with an enemy model retreats 3" directly away from the enemy model, is it still in combat with that enemy model? |
| A: | No. |
Errata
Addenda: 7.0 Combat Range
Add the following:
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
| Passive |
FLY: Soaring above the battlefield, this unit can reach destinations that are inaccessible to other troops.
Effect: As this unit moves, it ignores other models, terrain features and the combat ranges of enemy units. It cannot end its move in combat unless specified in the ability that allowed it to move. Ignore any vertical distance moved for this unit.
Obscuring
While every model in a non-MONSTER non‐WAR MACHINE unit that does not have the FLY keyword is within 1" of this terrain feature, the following apply:- That unit is only visible to enemy units that are within its combat range.
- The Range characteristic of that unit’s ranged weapons is halved (rounding down to the nearest inch).
Unstable
Models can move across but cannot be set up on or end any type of move on any part of this terrain feature that is more than 1" tall.1.4.2 Obscuring Terrain
Examples: Wyldwood, fortress wallTerrain Abilities: Cover, Obscuring, Unstable
6.0 Visibility
A target model is visible to another model (which we’ll call the ‘observing model’) if you can draw a straight line through the air (whether horizontal, diagonal or vertical) from any point on the observing model to any point on the target model that does not intersect any objects except for other models in the observing model’s unit. A target unit is visible to an observing unit if at least 1 model in the target unit is visible to at least 1 model in the observing unit. A model is always considered to be visible to itself.If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.
| ||
| In some cases, it might not be immediately clear whether a model is visible. If so, stoop down to get a look from behind the observing model. If any part of the other model is visible, even if it is just the tip of a spear, then that model is visible for rules purposes. | ||
FAQ / Errata
FAQ
| Q: | If a non-FLY INFANTRY HERO (e.g. a Scinari Cathallar) is a Shrine Guardian of a Shrine Luminor, and that Shrine Guardian is within 1" of an obscuring terrain feature, is the Shrine Guardian visible to enemy abilities that target the Shrine Guardian? |
| A: | Yes. |
Errata
6.0 Visibility
Add the following:
‘If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.’
‘If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.’
1.0 Wizards and Priests
WIZARDS are special units that can cast spells, and PRIESTS are special units that can chant prayers. Spells and prayers are powerful abilities that can have a dramatic impact on the battle.
18.1 Ward Saves
Units with the WARD keyword have the ‘Ward Save’ passive ability. The number after the WARD keyword indicates the ward value for the ward save. If a unit had WARD (5+), for example, its ward value would be 5. If a unit has more than one ward save, only the ward save with the lowest value applies to it; the other has no effect. Passive |
WARD SAVE: Whether through their uncanny reflexes, unnatural toughness or a source of mystical protection, these warriors can avoid otherwise lethal attacks.
Effect: In step 1 of the damage sequence (see 18.0), make a ward roll of D6 for each damage point in this unit’s damage pool. If the roll equals or exceeds this unit’s ward value, remove that damage point from the damage pool.
2.0 Spells
The declare step of each spell will tell you to make a casting roll of 2D6. If the roll does not equal or exceed the spell’s casting value (at the top-right corner of the spell), the spell fails and its effect is not resolved.If the unmodified casting roll includes 2 or more rolls of 1, the spell is miscast: the spell fails, its effect is not resolved, D3 mortal damage is inflicted on the WIZARD that used it, and that WIZARD cannot use any more spells in that phase.
Enemy reactions can only be used if the casting roll equals or exceeds the spell’s casting value. So long as the spell is not unbound (see 4.0), then it is successfully cast: resolve its effect.
EXAMPLE SPELL
| Your Hero Phase | 6 |
MYSTIC SHIELD: The caster's allies are bathed in an unearthly glow that protects them from harm.
Declare: Pick a visible friendly unit wholly within 12" of this WIZARD to be the target. Then, make a casting roll of 2D6.
Effect: The target has WARD (6+) this turn.
Effect: The target has WARD (6+) this turn.
| KEYWORDS | SPELL |
FAQ
| Q: | Is mortal damage inflicted by a miscast considered to be ‘mortal damage inflicted by a SPELL ability’ for the purposes of abilities like a Morghast Archai unit’s ‘Ebon-wrought Armour’ ability? |
| A: | No. |
The HERO keyword is used in the following Cities of Sigmar warscrolls:
Infantry Hero
Monster Hero
The INFANTRY keyword is used in the following Cities of Sigmar warscrolls:
Infantry Hero
Infantry
The ORDER keyword is used in the following Cities of Sigmar warscrolls:
Infantry Hero
Monster Hero
War Machine Hero
Cavalry
Infantry
and others...
The CITIES OF SIGMAR keyword is used in the following Cities of Sigmar warscrolls:
Infantry Hero
Monster Hero
War Machine Hero
Cavalry
Infantry
and others...
The SIGMARITE keyword is used in the following Cities of Sigmar warscrolls:
Infantry Hero
Monster Hero
War Machine Hero
Cavalry
Infantry
Monster
The CITIES OF SIGMAR, SIGMARITE and INFANTRY keywords are used in the following Cities of Sigmar warscrolls:
Infantry Hero
3.1 Regiments
Armies are made up of one or more regiments, each of which is led by a Hero. You must have at least 1 regiment in your army, and you can include a maximum of 5 regiments. To add a regiment, pick 1 HERO from your faction, then pick up to 3 non‑HERO units to accompany them.Each HERO’s battle profile lists which units can be added to their regiment, and each non-HERO unit’s battle profile lists any relevant keywords it has. The battle profiles of some HEROES may say that they can be added to the regiment of another HERO in place of a non-HERO unit in that regiment.
FAQ
| Q: | If a HERO is able to join another HERO's regiment (e.g. The Shadow Queen joining Morathi-Khaine, do they take the place of a non-HERO unit in that regiment? |
| A: | Yes. |
The WIZARD keyword is used in the following Cities of Sigmar warscrolls:
Cavalry Hero
Infantry Hero
Those HEROES can join an eligible regiment as a Thaumaturgical Specialist.
The CITIES OF SIGMAR, SIGMARITE and WAR MACHINE keywords are used in the following Cities of Sigmar warscrolls:
War Machine Hero