Stormcast Eternals – Vanguard-Raptors with Longstrike Crossbows
5" 2 3+ 1 Raining death upon the enemy from afar, Vanguard-Raptors armed with longstrike crossbows are marksmen with few equals. They often seek to eliminate enemy leaders and champions, spreading panic and disorder through the foe's ranks with carefully chosen kills. | ||
| RANGED WEAPONS | Rng | Atk | Hit | Wnd | Rnd | Dmg | ||
| Longstrike Crossbow [Anti-HERO (+1 Rend), Crit (Auto-wound)] | ||||||||
| Longstrike Crossbow Anti-HERO (+1 Rend), Crit (Auto-wound) | 18" | 2 | 3+ | 3+ | 2 | 2 | ||
| MELEE WEAPONS | Atk | Hit | Wnd | Rnd | Dmg | |||
| Heavy Stock | ||||||||
| Heavy Stock | 1 | 4+ | 3+ | - | 1 | |||
BATTLE PROFILE
Unit Size: 3 Points: 200
| MODEL | BASE SIZE |
| Raptor-Prime | 40mm |
| 2 x Vanguard-Raptors with Longstrike Crossbows | 60 × 35mm |
Can be reinforced: Yes
 Once Per Turn (Army), Your Hero Phase |
VANGUARD CHAMBER: Through swiftness, guile and more than a hint of savagery, the warriors of the Vanguard chamber are able to outfight forces many times their own limited numbers.
Effect: For the rest of the turn, this unit can use SHOOT and/or CHARGE abilities even if it used a RUN or RETREAT ability in the same turn.
 Your Shooting Phase |
HEADSHOT: When given time to take careful aim, a Vanguard-Raptor can find their mark even amidst the roiling mass of battle.
Effect: If this unit has not used a MOVE ability this turn and was not set up this turn, for the rest of the turn, this unit can ignore the effects of the ‘Guarded Hero’ ability when picking targets for its shooting attacks.
KEYWORDS | INFANTRY, CHAMPION |
| ORDER, STORMCAST ETERNALS, VANGUARD CHAMBER |
Errata
Vanguard Chamber Warscrolls
This update affects the following warscrolls:
• Vanguard-Raptors with Longstrike Crossbows
• Vanguard-Raptors with Hurricane Crossbows
• Vanguard-Palladors with Starstrike Javelins
• Vanguard-Palladors with Shock Handaxes
• Vanguard-Hunters
• Neave Blacktalon
• Lord-Aquilor
Change the ‘Vanguard Chamber’ ability to:
• Vanguard-Raptors with Longstrike Crossbows
• Vanguard-Raptors with Hurricane Crossbows
• Vanguard-Palladors with Starstrike Javelins
• Vanguard-Palladors with Shock Handaxes
• Vanguard-Hunters
• Neave Blacktalon
• Lord-Aquilor
Change the ‘Vanguard Chamber’ ability to:
| Once Per Turn (Army), Your Hero Phase |
VANGUARD CHAMBEREffect: For the rest of the turn, this unit can use SHOOT and/ or CHARGE abilities even if it used a RUN or RETREAT ability in the same turn.
17.2 Mortal Damage
Some abilities inflict mortal damage. If an ability inflicts mortal damage on a unit, add that number of damage points to the unit’s damage pool for that ability (see 18.2 Allocating Damage).
 Your Movement Phase |
RETREAT: The fighters disengage from combat, though at the cost of lowering their defences.
Declare: Pick a friendly unit that is in combat to use this ability.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.
| KEYWORDS | CORE, MOVE, RETREAT |
7.0 Combat Range
Each model has a combat range that extends 3" horizontally from its base and any distance vertically from that circle to form a cylinder. The combat range of a unit extends 3" horizontally and any distance vertically from every model in that unit. Units from opposing armies that are within each other’s combat range and that are visible to each other are in combat with each other. When a unit that is not in combat enters the combat range of a visible enemy unit, it moves into combat.
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’
| ||
FAQ / Errata
FAQ
| Q: | If a model in base-to-base contact with an enemy model retreats 3" directly away from the enemy model, is it still in combat with that enemy model? |
| A: | No. |
Errata
Addenda: 7.0 Combat Range
Add the following:
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
‘A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it.’
Hit Roll
Roll a dice. If the roll equals or exceeds the attacking weapon’s Hit characteristic, the attack scores a successful hit: move on to the next step. If not, the attack fails and the attack sequence ends. Unmodified hit rolls of 1 always fail. If an unmodified hit roll for an attack made with a weapon is a 6, that attack is a critical hit.| Critical hits have no effect on their own but often trigger additional effects (see 20.0 Weapon Abilities). | ||
Cover
Subtract 1 from hit rolls for attacks that target a unit that is behind or wholly on this terrain feature, unless that unit charged this turn or has the FLY keyword.| Passive |
FLY: Soaring above the battlefield, this unit can reach destinations that are inaccessible to other troops.
Effect: As this unit moves, it ignores other models, terrain features and the combat ranges of enemy units. It cannot end its move in combat unless specified in the ability that allowed it to move. Ignore any vertical distance moved for this unit.
Obscuring
While every model in a non-MONSTER non‐WAR MACHINE unit that does not have the FLY keyword is within 1" of this terrain feature, the following apply:- That unit is only visible to enemy units that are within its combat range.
- The Range characteristic of that unit’s ranged weapons is halved (rounding down to the nearest inch).
Unstable
Models can move across but cannot be set up on or end any type of move on any part of this terrain feature that is more than 1" tall.1.4.2 Obscuring Terrain
Examples: Wyldwood, fortress wallTerrain Abilities: Cover, Obscuring, Unstable
6.0 Visibility
A target model is visible to another model (which we’ll call the ‘observing model’) if you can draw a straight line through the air (whether horizontal, diagonal or vertical) from any point on the observing model to any point on the target model that does not intersect any objects except for other models in the observing model’s unit. A target unit is visible to an observing unit if at least 1 model in the target unit is visible to at least 1 model in the observing unit. A model is always considered to be visible to itself.If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.
| ||
| In some cases, it might not be immediately clear whether a model is visible. If so, stoop down to get a look from behind the observing model. If any part of the other model is visible, even if it is just the tip of a spear, then that model is visible for rules purposes. | ||
FAQ / Errata
FAQ
| Q: | If a non-FLY INFANTRY HERO (e.g. a Scinari Cathallar) is a Shrine Guardian of a Shrine Luminor, and that Shrine Guardian is within 1" of an obscuring terrain feature, is the Shrine Guardian visible to enemy abilities that target the Shrine Guardian? |
| A: | Yes. |
Errata
6.0 Visibility
Add the following:
‘If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.’
‘If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.’
Shooting attacks
Shooting attacks are made with ranged weapons. The target unit(s) must be within a distance equal to the Range characteristic of the weapon being used and visible to the attacking model. Models cannot make shooting attacks if their unit is in combat, unless otherwise specified (see 20.0 Weapon Abilities).Companion
Unless otherwise specified, attacks made by this weapon are not affected by friendly abilities that modify hit rolls, wound rolls or weapon characteristics, except for those that apply negative modifiers (e.g. ‘Covering Fire’).The INFANTRY keyword is used in the following Stormcast Eternals warscrolls:
The ORDER keyword is used in the following Stormcast Eternals warscrolls:
Cavalry Hero
Infantry Hero
Monster Hero
Cavalry
The STORMCAST ETERNALS keyword is used in the following Stormcast Eternals warscrolls:
Cavalry Hero
Infantry Hero
Monster Hero
Cavalry
Infantry
and others...
Anti-X (+1 Rend)
Add 1 to this weapon’s Rend characteristic if the target has the keyword after ‘Anti-’ or fulfils the condition after ‘Anti-’. Multiples of this ability are cumulative. For example, if a weapon has both Anti-charge (+1 Rend) and Anti-HERO (+1 Rend), then add 2 to the Rend characteristic of the weapon for attacks that target a HERO that charged in the same turn.1.0 Champions
Units with the CHAMPION keyword have one or more champion models. If there is a number after the CHAMPION keyword, that number indicates the proportion of models in that unit that can be champions. In any other case, 1 model in the unit can be a champion. Units with the CHAMPION keyword have the following passive ability: Passive |
CHAMPION: A veteran fighter leads the charge.
Effect: Add 1 to the Attacks characteristic of weapons used by champions in this unit. If this unit is a BEAST, this ability affects this unit’s Companion weapons.
Errata
Champion
Change the definition of Champion to:
‘Champion: Model’s weapons have +1 to Attacks characteristic. (Command Models, 1.0)’
‘Champion: Model’s weapons have +1 to Attacks characteristic. (Command Models, 1.0)’
The CHAMPION keyword is used in the following Stormcast Eternals warscrolls:
The VANGUARD CHAMBER keyword is used in the following Stormcast Eternals warscrolls:
Cavalry Hero
Beast
Crit (Auto-wound)
If an attack made with this weapon scores a critical hit, that attack automatically wounds the target. Make a save roll as normal. Passive |
GUARDED HERO: The leader is shielded by their warriors, who close ranks around them to protect them from harm.
Effect: If this HERO(not MONSTER or WAR MACHINES) is within the combat range of a friendly unit that is not a HERO:
- Subtract 1 from hit rolls for shooting attacks that target this HERO.
- If this HERO is INFANTRY, they cannot be picked as the target of shooting attacks made by models more than 12" from them.
16.0 Picking Targets
When declaring an ATTACK ability for a unit, you must pick the target unit(s) for its attacks. The number of attacks each model can make is equal to the Attacks characteristic of the weapons it is using. In most cases, models attack with every weapon on their warscroll (melee weapons for combat attacks, ranged weapons for shooting attacks), though some warscrolls specify that certain models in the unit are armed with special weapons or that the unit must pick between multiple weapons when it attacks.If the unit is in combat, it can only target units that are in combat with it. If a model has more than one attack, you can split the attacks between eligible targets as you wish.
- Combat attacks are made with melee weapons. The target unit(s) must be within the combat range of the attacking model and visible to it. The model must attack with all of the melee weapons it is armed with.
- Shooting attacks are made with ranged weapons. The target unit(s) must be within a distance equal to the Range characteristic of the weapon being used and visible to the attacking model. Models cannot make shooting attacks if their unit is in combat, unless otherwise specified (see 20.0 Weapon Abilities).
FAQ
| Q: | When making shooting attacks, can all models in the attacking unit shoot even if the target unit is not visible to some of those models? |
| A: | No, the only models in the attacking unit that can make shooting attacks are those that the target unit is visible to. |
| Q: | When a unit uses a SHOOT ability, does it have to shoot with all of the ranged weapons that it is armed with? |
| A: | Yes. |