14.3 Charge Phase

Your Charge Phase

CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.

Declare: Pick a friendly unit that is not in combat and has not used a RUN or RETREAT ability this turn to use this ability. Then, make a charge roll of 2D6.

Effect: That unit can move a distance up to the value of the charge roll. That unit can move through the combat ranges of any enemy units and must end that move within 1/2" of a visible enemy unit. If it does so, the unit using this ability has charged.

KEYWORDS

CORE, MOVE, CHARGE

Hit Roll

Roll a dice. If the roll equals or exceeds the attacking weapon’s Hit characteristic, the attack scores a successful hit: move on to the next step. If not, the attack fails and the attack sequence ends. Unmodified hit rolls of 1 always fail. If an unmodified hit roll for an attack made with a weapon is a 6, that attack is a critical hit.


	Critical hits have no effect on their own but often trigger additional effects (see 20.0 Weapon Abilities).

The INFANTRY keyword is used in the following Kharadron Overlords warscrolls:

Infantry Hero

• Aether-Khemist

• Aetheric Navigator

• Arkanaut Admiral

• Brokk Grungsson, Lord-Magnate of Barak-Nar

• Codewright

• Drekki Flynt

• Endrinmaster with Dirigible Suit

• Endrinmaster with Endrinharness

• Null-Khemist

•

White Dwarf’11/24 The Duardin Ascendant (4th edition)

Grombrindal, The White Dwarf

•

Expansion. Scourge of Aqshy - Kharadron Overlords (4th edition)

Scourge of Aqshy Null-Khemist

•

Expansion. Scourge of Ghyran - Kharadron Overlords (4th edition)

Scourge of Ghyran Codewright

Infantry

• Arkanaut Company

• Endrinriggers

• Grundstok Thunderers

• Skywardens

• Vongrim Harpoon Crew

• Vongrim Salvagers

•

Scourge of Aqshy Endrinriggers

•

Warscroll. Legends Warscrolls (4th edition)

Thundrik’s Profiteers

Universal Core Abilities - Charge Phase

Your Charge Phase

CHARGE: With a mighty battle cry, the warriors charge into combat with the enemy.

KEYWORDS

CORE, MOVE, CHARGE

The SKYVESSEL keyword is used in the following Kharadron Overlords warscrolls:

War Machine

• Arkanaut Frigate

• Arkanaut Ironclad

• Grundstok Gunhauler

•

Scourge of Ghyran Grundstok Gunhauler

3.1 Regiments

Armies are made up of one or more regiments, each of which is led by a Hero. You must have at least 1 regiment in your army, and you can include a maximum of 5 regiments. To add a regiment, pick 1 HERO from your faction, then pick up to 3 non‑HERO units to accompany them.

Each HERO’s battle profile lists which units can be added to their regiment, and each non-HERO unit’s battle profile lists any relevant keywords it has. The battle profiles of some HEROES may say that they can be added to the regiment of another HERO in place of a non-HERO unit in that regiment.

24.1 Reserve Units

Some abilities allow you to set up units in reserve. These units are placed to one side instead of being set up on the battlefield. At the start of the fourth battle round, units that were set up in reserve using a DEPLOY ability and that are still in reserve are destroyed.

7.0 Combat Range

Each model has a combat range that extends 3" horizontally from its base and any distance vertically from that circle to form a cylinder. The combat range of a unit extends 3" horizontally and any distance vertically from every model in that unit. Units from opposing armies that are within each other’s combat range and that are visible to each other are in combat with each other. When a unit that is not in combat enters the combat range of a visible enemy unit, it moves into combat.
A model is considered to be in combat with an enemy unit if that unit is within the model’s combat range and visible to it’


	A unit’s combat range extends 3" out from every model in that unit. If any enemy models are within a unit’s combat range and visible to it, that unit is in combat.

18.1 Ward Saves

Units with the WARD keyword have the ‘Ward Save’ passive ability. The number after the WARD keyword indicates the ward value for the ward save. If a unit had WARD (5+), for example, its ward value would be 5. If a unit has more than one ward save, only the ward save with the lowest value applies to it; the other has no effect.

Passive

WARD SAVE: Whether through their uncanny reflexes, unnatural toughness or a source of mystical protection, these warriors can avoid otherwise lethal attacks.

Effect: In step 1 of the damage sequence (see 18.0), make a ward roll of D6 for each damage point in this unit’s damage pool. If the roll equals or exceeds this unit’s ward value, remove that damage point from the damage pool.

32.1 Contesting Objectives

Unless otherwise specified, if an objective is within a model’s combat range, that model is contesting that objective. If any models in a unit are contesting an objective, that unit is contesting that objective.

Each unit can only count as contesting a single objective for the purposes of determining objective control (see 32.2). Before determining objective control, for each of their units contesting two or more objectives, the active player must pick one of those objectives for it to contest. Then, their opponent does the same.

Designer’s Note: For purposes other than determining objective control, a unit can contest more than one objective.

17.2 Mortal Damage

Some abilities inflict mortal damage. If an ability inflicts mortal damage on a unit, add that number of damage points to the unit’s damage pool for that ability (see 18.2 Allocating Damage).

Universal Core Abilities - Movement Phase

Your Movement Phase

NORMAL MOVE: The warriors advance across the battlefield.

Declare: Pick a friendly unit that is not in combat to use this ability.

Effect: That unit can move a distance up to its Move characteristic. That unit cannot move into combat during any part of that move.

KEYWORDS

CORE, MOVE

Your Movement Phase

RUN: The unit rushes into position.

Declare: Pick a friendly unit that is not in combat to use this ability.

Effect: Make a run roll of D6. That unit can move a distance up to its Move characteristic added to the run roll. That unit cannot move into combat during any part of that move.

KEYWORDS

CORE, MOVE, RUN

Your Movement Phase

RETREAT: The fighters disengage from combat, though at the cost of lowering their defences.

Declare: Pick a friendly unit that is in combat to use this ability.

Effect: Inflict D3 mortal damage on that unit. That unit can move a distance up to its Move characteristic. That unit can move through the combat ranges of any enemy units but cannot end that move within an enemy unit’s combat range.

KEYWORDS

CORE, MOVE, RETREAT

32.2 Objective Control

In the deployment phase after all Deployment Phase abilities have been used and at the end of each turn, follow this sequence for each objective in an order chosen by the active player:

Starting with the active player, each player determines the control score of each of their units that is contesting that objective. A unit’s control score is the combined Control characteristics of all the models in that unit that are contesting the objective. Some abilities modify a unit’s control score, but it cannot be reduced to less than 1.
Each player adds up the control scores of all of their units contesting that objective. This is their army control score for that objective.
The players compare their army control scores for that objective. If one player’s score is higher, that player gains control of that objective. Once a player gains control of an objective, it remains under their control until their opponent gains control of it.


	Sometimes objective markers get accidentally nudged while you are moving models around. This is perfectly fine - just remember to put them back in their proper positions when determining objective control.

13.1 Fight Abilities

Abilities with the FIGHT keyword follow a different sequence to other abilities. When the players are using

Combat Phase

abilities as described in 13.0, they cannot use FIGHT abilities.

After the players have finished using

Combat Phase

abilities that are not FIGHT abilities, they must alternate picking 1 eligible unit to use a FIGHT ability, starting with the active player. Each unit in combat must use a FIGHT ability if it is able to.

Once a player has no more units that are eligible to use a FIGHT ability, the other player continues to pick units that are eligible to use a FIGHT ability, one after another, until there are no more units that are eligible to use a FIGHT ability.


	The active player uses Combat Phase abilities that are not FIGHT abilities, then the opponent does the same. Players alternate picking a unit to use a FIGHT ability, starting with the active player. Each unit must use a FIGHT ability if it is able to.

15.3 Pile-in Moves

Some abilities, such as FIGHT abilities, allow a unit to make a short move called a pile-in move to get into a better position for combat. To do so:

If your unit is in combat: Pick an enemy unit your unit is in combat with to be the target of the pile-in move. Each model in your unit can move up to 3". That move can pass through the combat ranges of any enemy units, but each model must end that move no further from the target unit. At the end of the move, your unit must still be in combat with all units that it was in combat with at the start of the move.

If your unit is not in combat: Each model in your unit can move 3" in any direction. That move can pass through and end within the combat ranges of any enemy units.


	Pile in: move up to 3". If in combat, the unit must end the move closer, or at least as close, to the target enemy unit.

19.0 Strike-first and Strike-last

If there are any STRIKE-FIRST units in combat after any non-FIGHT combat phase abilities have been used, other units cannot be picked to use a FIGHT ability until those units have been picked to use a FIGHT ability. After all those STRIKE-FIRST units have fought, the active player picks the next unit to fight.

If there are any STRIKE-LAST units in combat, they cannot be picked to use a FIGHT ability if there are any units in combat that do not have STRIKE-LAST and have not yet used a FIGHT ability.

If a unit has STRIKE-FIRST and STRIKE-LAST, treat it as if it had neither.


	There may be situations when a unit that has STRIKE-FIRST is not in combat at the start of the phase, but because of moves such as pile-in moves, it is ‘pulled into combat’ later in the phase. In such cases, STRIKE-FIRST has no effect on that unit because it was not in combat at the start of the phase. Abilities that allow a unit to use a FIGHT ability immediately after another unit do not override the STRIKE-FIRST or STRIKE-LAST constraints, so you could not pick a unit with STRIKE-LAST to fight immediately after a unit with STRIKE-FIRST.

6.0 Visibility

A target model is visible to another model (which we’ll call the ‘observing model’) if you can draw a straight line through the air (whether horizontal, diagonal or vertical) from any point on the observing model to any point on the target model that does not intersect any objects except for other models in the observing model’s unit. A target unit is visible to an observing unit if at least 1 model in the target unit is visible to at least 1 model in the observing unit. A model is always considered to be visible to itself.
If a rule or ability requires a target to be both within a given range of and visible to the unit using that ability, or to a model in that unit, both conditions must be met by the same model in the target. You could not, for instance, target a unit where one model is within range but not visible and another model is not in range but is visible.


	If any part of another model can be seen by an observing model, both the target model and its unit are visible to that observing model.


	In some cases, it might not be immediately clear whether a model is visible. If so, stoop down to get a look from behind the observing model. If any part of the other model is visible, even if it is just the tip of a spear, then that model is visible for rules purposes.

2.0 Spells

The declare step of each spell will tell you to make a casting roll of 2D6. If the roll does not equal or exceed the spell’s casting value (at the top-right corner of the spell), the spell fails and its effect is not resolved.

If the unmodified casting roll includes 2 or more rolls of 1, the spell is miscast: the spell fails, its effect is not resolved, D3 mortal damage is inflicted on the WIZARD that used it, and that WIZARD cannot use any more spells in that phase.

Enemy reactions can only be used if the casting roll equals or exceeds the spell’s casting value. So long as the spell is not unbound (see 4.0), then it is successfully cast: resolve its effect.

EXAMPLE SPELL

Your Hero Phase

MYSTIC SHIELD: The caster's allies are bathed in an unearthly glow that protects them from harm.

Declare: Pick a visible friendly unit wholly within 12" of this WIZARD to be the target. Then, make a casting roll of 2D6.

Effect: The target has WARD (6+) this turn.

KEYWORDS

SPELL

Unbind

Reaction: Opponent declared a SPELL ability

UNBIND: The wizard saps the energy from an enemy’s spell, nullifying its effects.

Used By: A friendly WIZARD within 30" of the enemy WIZARD casting the spell.

Effect: Make an unbinding roll of 2D6. If the roll exceeds the casting roll tor the spell, then the spell is unbound and its effect is not resolved. This reaction cannot be used more than once per casting roll.

KEYWORDS

UNBIND

1.1 Power Level

Each WIZARD and PRIEST has a power level shown after the keyword, e.g. WIZARD (2). A WIZARD’s casting power level determines how many Spell abilities they can use per phase. A PRIEST’s chanting power level determines how many PRAYER abilities they can use per phase.

15.4 Flying

Units with the FLY keyword have the following passive ability:

Passive

FLY: Soaring above the battlefield, this unit can reach destinations that are inaccessible to other troops.

Effect: As this unit moves, it ignores other models, terrain features and the combat ranges of enemy units. It cannot end its move in combat unless specified in the ability that allowed it to move. Ignore any vertical distance moved for this unit.


	When moving flying units, move them horizontally in any direction, ignoring intervening models and terrain, and place them where you wish, so long as they are allowed to end their move on that spot. Note that some units have the FLY keyword even if that unit can’t really fly. This often represents units that bounce, bound or skitter across the battlefield so adeptly that they might as well be flying!

18.4 Destroyed Units

When the last model in a unit is slain, the unit is destroyed and all remaining damage points inflicted on that unit have no effect. Similarly, if something causes a unit to be destroyed, all models in the unit are slain and removed from play.

16.0 Picking Targets

When declaring an ATTACK ability for a unit, you must pick the target unit(s) for its attacks. The number of attacks each model can make is equal to the Attacks characteristic of the weapons it is using. In most cases, models attack with every weapon on their warscroll (melee weapons for combat attacks, ranged weapons for shooting attacks), though some warscrolls specify that certain models in the unit are armed with special weapons or that the unit must pick between multiple weapons when it attacks.

If the unit is in combat, it can only target units that are in combat with it. If a model has more than one attack, you can split the attacks between eligible targets as you wish.

Combat attacks are made with melee weapons. The target unit(s) must be within the combat range of the attacking model and visible to it. The model must attack with all of the melee weapons it is armed with.

Shooting attacks are made with ranged weapons. The target unit(s) must be within a distance equal to the Range characteristic of the weapon being used and visible to the attacking model. Models cannot make shooting attacks if their unit is in combat, unless otherwise specified (see 20.0 Weapon Abilities).

Shooting attacks

Shooting attacks are made with ranged weapons. The target unit(s) must be within a distance equal to the Range characteristic of the weapon being used and visible to the attacking model. Models cannot make shooting attacks if their unit is in combat, unless otherwise specified (see 20.0 Weapon Abilities).

Your Shooting Phase

SHOOT: The warriors take aim and unleash a deadly volley.

Declare: Pick a friendly unit that has not used a RUN or RETREAT ability this turn to use this ability. Then, pick one or more enemy units as the target(s) of that unit’s attacks (see 16.0).

Effect: Resolve shooting attacks against the target unit(s).

KEYWORDS

CORE, ATTACK, SHOOT

Combat attacks

Combat attacks are made with melee weapons. The target unit(s) must be within the combat range of the attacking model and visible to it. The model must attack with all of the melee weapons it is armed with.

Any Combat Phase

FIGHT: Locked in a deadly melee, the fighters strike out at their foes.

Declare: Pick a friendly unit that is in combat or that charged this turn to use this ability. That unit can make a pile-in move. Then, if that unit is in combat, you must pick one or more enemy units as the target(s) of that unit’s attacks.

Effect: Resolve combat attacks against the target unit(s).

KEYWORDS

CORE, ATTACK, FIGHT

Shoot in Combat

This weapon can be used to make shooting attacks even if the attacking unit is in combat.

7.0 Manifestations

There are two types of manifestation: endless spells, which can be summoned by WIZARDS, and invocations, which can be summoned by PRIESTS. Each manifestation has its own warscroll, and the spell or prayer that allows that manifestation to be summoned will be found in the appropriate manifestation lore. No more than 1 friendly WIZARD or PRIEST can attempt to summon the same manifestation per turn, and a friendly WIZARD or PRIEST cannot attempt to summon a friendly manifestation that was removed from play in the same turn.

Manifestations are not units but can be interacted with in similar ways, as explained next:

ALL MANIFESTATIONS

Models can move through them but cannot end a move on them.

Units can finish a charge move within ½" of an enemy manifestation instead of within ½" of an enemy unit.

They can be damaged and destroyed as if they were units but do not count as destroyed units for the purposes of battle tactics and abilities.

They are affected by all enemy abilities as if they were units.

They can use CORE abilities as if they were units, and they can use abilities on their warscroll. Unless specified otherwise, they cannot use and are not affected by any other friendly abilities, and they do not count as units for the purposes of battle tactics or friendly abilities.

They can only use the ‘Shoot’ or ‘Fight’ abilities if they have weapons of the appropriate type.

MANIFESTATIONS WITH A MOVE CHARACTERISTIC OF ‘-’

They cannot move.

They only count as being in combat in the combat phase, and enemy units only count as being in combat with them in the combat phase.

They cannot make shooting attacks with ranged weapons that do not have Shoot in Combat while there is a visible enemy unit within 3" of them.

MANIFESTATIONS WITH A MOVE CHARACTERISTIC GREATER THAN ‘-’

They are treated as if they were units for the purposes of movement, combat range, being in combat and setting up terrain features, other manifestations and other units.

Passive

FLY: Soaring above the battlefield, this unit can reach destinations that are inaccessible to other troops.

Wound Roll

Roll a dice. If the roll equals or exceeds the attacking weapon’s Wound characteristic, the attack successfully wounds: move on to the next step. If not, the attack fails and the attack sequence ends. Unmodified wound rolls of 1 always fail.

3.5 Regiments of Renown

In addition to creating your own regiments, you can also spend points to include 1 Regiment of Renown. Regiments of Renown are pre-built regiments, each with their own special abilities. The rules for each Regiment of Renown will specify which factions can include it. A unit in a Regiment of Renown cannot be your general even if it is a WARMASTER.

You cannot include more than one Regiment of Renown in your army unless otherwise specified in the notes column of that regiment’s battle profile.
Units in a Regiment of Renown cannot use (but can be picked as the target of, if otherwise eligible) any faction rules from the faction they are allied into, including enhancements and lores.
If an ability allows you to set up a replacement unit (Core Rules, 24.2) for a unit in a Regiment of Renown, that unit also counts as being part of that Regiment of Renown.

Crit (Mortal)

If an attack made with this weapon scores a critical hit, that attack inflicts mortal damage on the target unit equal to the Damage characteristic of that weapon and the attack sequence ends.

Save Roll

The commander of the target unit rolls a dice, subtracting the attacking weapon’s Rend characteristic from the roll. Unmodified save rolls of 1 always fail. If the roll equals or exceeds the Save characteristic of the target unit, the attack fails and the attack sequence ends. If not, it is a successful attack: move on to the next step.

1.0 Wizards and Priests

WIZARDS are special units that can cast spells, and PRIESTS are special units that can chant prayers. Spells and prayers are powerful abilities that can have a dramatic impact on the battle.

7.2 Banishing Manifestations

Instead of using a SPELL or PRAYER ability (including when using the ‘Magical Intervention’ ability), each WIZARD and PRIEST can use the ‘Banish Manifestation’ ability:

Your Hero Phase

BANISH MANIFESTATION: The arcane forces sustaining a manifestation are disrupted.

Declare: Pick a friendly WIZARD or PRIEST to use this ability, pick a MANIFESTATION within 30" of them that was not summoned this turn to be the target, then make a banishment roll of 2D6. Add 1 to the banishment roll for each additional enemy MANIFESTATION on the battlefield after the first. You cannot pick the same MANIFESTATION to be the target of this ability more than once per turn.

Effect: If the banishment roll equals or exceeds the banishment value listed on the MANIFESTATION’s warscroll, it is banished and removed from play.

KEYWORDS

BANISH

32.0 Objectives

Many battleplans award victory points for controlling objectives, which are represented by objective markers. Unless otherwise specified, objective markers are round and 40mm wide. Models can move over and end their moves on objective markers. If an objective marker is on the border between territories, it is within all those territories but wholly within none of them. Objective markers don’t block visibility.

3.0 Prayers

The declare step of each prayer will tell you to make a chanting roll of D6. On an unmodified chanting roll of 1, the prayer fails, its effect is not resolved and you must remove D3 ritual points from the PRIEST using the prayer.

Otherwise, pick one of the following:

Give a number of ritual points to the PRIEST equal to the chanting roll (ritual points can be accumulated over multiple turns).
Add the PRIEST’s ritual points to the chanting roll. If the chanting roll equals or exceeds the prayer’s chanting value (at the top-right corner of the prayer), it is answered: resolve the effect of the prayer, then reset the PRIEST’s ritual points total to 0.

All PRIESTS know the following prayer:

Your Hero Phase

SACRED RITES: The priest focuses on safely setting their ritual into motion.

Declare: Pick a friendly PRIEST to use this ability, then make a chanting roll of D6. On an unmodified chanting roll of 1, remove 1 ritual point from that PRIEST instead of D3.

Effect: Give a number to ritual points to the PRIEST equal to the unmodified chanting roll and do not reset the PRIEST’s ritual points to 0.

KEYWORDS

PRAYER, UNLIMITED

EXAMPLE PRAYER

Once Per Battle, Your Hero Phase

RESURRECTION: A fallen hero is brought back from death, their vitality fully restored.

Declare: Make a chanting roll of D6.

Effect: Pick a friendly INFANTRY HERO that has been slain and return them to the battlefield. Set up that HERO wholly within 3" of this PRIEST.

KEYWORDS

PRAYER

21.0 Healing

Some abilities allow you to heal a unit. To heal a unit, remove a number of damage points from the unit equal to the number in brackets after ‘Heal’, e.g. Heal (2).

Your Movement Phase, Reaction: You declared a non-CHARGE MOVE ability for a friendly SKYVESSEL

TRANSPORT SKYFARERS: The Kharadron rule the skies of the realms with fleets of fearsome airships crewed by hardened duardin.

Effect: Pick a number of units up to that SKYVESSEL’s Transport Capacity (see its warscroll) that are wholly within 6" of it and not in combat to be the targets. Units that have been transported this turn cannot be targets.

Remove the targets from the battlefield. After the SKYVESSEL ends its move, you must set up each target unit on the battlefield, wholly within 6" of that SKYVESSEL and not in combat. Those units have been transported. A unit cannot use CHARGE abilities if it was transported in the same turn.

Once Per Battle (Army), Deployment Phase

THE FLAGSHIP: Every fleet commander designates one of their vessels to be their flagship.

Declare: Pick a friendly SKYVESSEL to be the target. The target can be in reserve.

Effect: The target has the FLAGSHIP keyword for the rest of the battle. If the target does not have a Great Endrinwork, give the target 1 Great Endrinwork.

Designer’s Note: This Great Endrinwork is given to the unit during the deployment phase, not during army composition.

Charge (+1 Damage)

Add 1 to this weapon’s Damage characteristic if the attacking unit charged this turn.

Anti-X (+1 Rend)

Add 1 to this weapon’s Rend characteristic if the target has the keyword after ‘Anti-’ or fulfils the condition after ‘Anti-’. Multiples of this ability are cumulative. For example, if a weapon has both Anti-charge (+1 Rend) and Anti-HERO (+1 Rend), then add 2 to the Rend characteristic of the weapon for attacks that target a HERO that charged in the same turn.

Crit (2 Hits)

If an attack made with this weapon scores a critical hit, that attack scores 2 hits on the target unit instead of 1. Make a wound roll for each hit.

Crit (Auto-wound)

If an attack made with this weapon scores a critical hit, that attack automatically wounds the target. Make a save roll as normal.

18.2 Allocating Damage

After resolving the effect of any ability that inflicts damage points (whether via attacks, mortal damage or both), you must allocate the damage points.

When allocating damage points to a unit, the damage points in its damage pool are allocated to it one at a time. Each time the number of damage points allocated to the unit equals the Health characteristic of that unit, 1 model in that unit is slain (and removed from play) and the number of damage points allocated to that unit is reset to 0. Keep allocating damage points until there are none left in the damage pool.

If the number of damage points allocated to a unit is not enough to slay a model, keep track of the number of damage points currently allocated to the unit (most players place a dice or markers next to the unit). While a unit has any damage points allocated to it, it is damaged.

Companion

Unless otherwise specified, attacks made by this weapon are not affected by friendly abilities that modify hit rolls, wound rolls or weapon characteristics, except for those that apply negative modifiers (e.g. ‘Covering Fire’).

1.0 Champions

Units with the CHAMPION keyword have one or more champion models. If there is a number after the CHAMPION keyword, that number indicates the proportion of models in that unit that can be champions. In any other case, 1 model in the unit can be a champion. Units with the CHAMPION keyword have the following passive ability:

Passive

CHAMPION: A veteran fighter leads the charge.

Effect: Add 1 to the Attacks characteristic of weapons used by champions in this unit. If this unit is a BEAST, this ability affects this unit’s Companion weapons.

Those HEROES can join an eligible regiment as a Guild Officer.

Infantry Hero

• Aether-Khemist

• Aetheric Navigator

• Endrinmaster with Dirigible Suit

• Endrinmaster with Endrinharness

• Codewright

•

Scourge of Ghyran Codewright

•

Scourge of Aqshy Null-Khemist

3.0 Standard Bearers

Units with the STANDARD BEARER keyword have one or more standard bearer models. The number after the STANDARD BEARER keyword indicates the proportion of models in that unit that can be standard bearers. Units with the STANDARD BEARER keyword have the following passive ability:

Passive

STANDARD BEARER: The unit’s standard provides a rallying point in the chaos of battle.

Effect: While this unit contains any standard bearers, add 1 to this unit’s control score.

The non-HERO KHARADRON OVERLORDS keyword is used in the following Kharadron Overlords warscrolls:

Infantry

• Arkanaut Company

• Endrinriggers

• Grundstok Thunderers

• Skywardens

• Vongrim Harpoon Crew

• Vongrim Salvagers

•

Scourge of Aqshy Endrinriggers

•

Thundrik’s Profiteers

War Machine

• Arkanaut Frigate

• Arkanaut Ironclad

• Auto-Endrin

• Grundstok Gunhauler

•

Scourge of Ghyran Grundstok Gunhauler

Faction Terrain

• Zontari Endrin Dock

Banish Manifestation

Your Hero Phase

BANISH MANIFESTATION: The arcane forces sustaining a manifestation are disrupted.

KEYWORDS

BANISH

The MEGA-GARGANT keyword is used in the following Sons of Behemat warscrolls:

Monster Hero

• Beast-smasher Mega-Gargant

• Gatebreaker Mega-Gargant

• King Brodd

• Kraken-eater Mega-Gargant

• Warstomper Mega-Gargant

•

Expansion. Scourge of Aqshy - Sons of Behemat (4th edition)

Scourge of Aqshy Gatebreaker Mega-Gargant

•

Expansion. Scourge of Ghyran - Sons of Behemat (4th edition)

Scourge of Ghyran Kraken-eater Mega-Gargant

Roll-off

If you are instructed to roll off, each player should roll a dice. Whichever player has a higher roll wins the roll-off. If the result is a tie, each player should roll off again until there is a clear winner, unless otherwise specified.

The VANGUARD-PALLADORS keyword is used in the following Stormcast Eternals warscrolls:

Cavalry

• Vanguard-Palladors with Shock Handaxes

• Vanguard-Palladors with Starstrike Javelins

Once Per Turn (Army), Start of Any Turn

A KINGDOM DELUDED: The mass delusions suffered by these cannibals are volatile but intense.

Declare: You must use this ability at the start of each turn. If it is the first turn of the battle, pick a DELUSION from these battle traits or, unless otherwise specified, from the warscroll of a friendly unit on the battlefield. If it is not the first turn, make a delusion roll of D6.

Effect: On a delusion roll of 1-2, you must pick a different DELUSION to the one you picked last turn. On a 3-4, you must pick the same Delusion as the one you picked last turn, even if it is on the warscroll of a unit that has been destroyed. In such cases, the eect of that D applies as if the unit had not been destroyed. On a 5-6, you must pick a DELUSION like you did in the first turn. For the rest of the turn, you believe the DELUSION you picked.

The DUARDIN and INFANTRY keywords are used in the following Kharadron Overlords warscrolls:

Infantry Hero

• Aether-Khemist

• Aetheric Navigator

• Arkanaut Admiral

• Brokk Grungsson, Lord-Magnate of Barak-Nar

• Codewright

• Drekki Flynt

• Endrinmaster with Dirigible Suit

• Endrinmaster with Endrinharness

• Null-Khemist

•

Grombrindal, The White Dwarf

•

Scourge of Aqshy Null-Khemist

•

Scourge of Ghyran Codewright

Infantry

• Arkanaut Company

• Endrinriggers

• Grundstok Thunderers

• Skywardens

• Vongrim Harpoon Crew

• Vongrim Salvagers

•

Scourge of Aqshy Endrinriggers

•

Thundrik’s Profiteers

ERUPTION OF FURY

Once Per Turn (Army), End of Any Turn

ERUPTION OF FURY: Stoked by the ongoing battle, this warrior’s wrath erupts in a display of bone-splintering violence.

Declare: Pick a friendly unit to use this ability, then pick an enemy unit in combat with that friendly unit to be the target.

Effect: Pick 1 of the melee weapons that the unit using this ability is armed with. Then, spend up to 3 rage dice.

Resolve a number of combat attacks against the target using the melee weapon you picked equal to the number of rage dice you spent.

Those attacks cannot score critical hits. Instead, for each unmodified hit roll of 6 for those attacks:

Inflict an additional D3 mortal damage on each enemy unit in combat with the unit using this ability.
Your opponent must increase their fury level by 1, to a maximum of 7.

For each unmodified hit roll of 1 for those attacks, allocate D3 mortal damage to this unit after the damage sequence has been resolved (ward rolls cannot be made for those damage points).

Designer’s Note: Rage dice do not add to the Attacks characteristic of the weapon you pick; if you spend 3 rage dice to use this ability, you only make 3 combat attacks.

KEYWORDS

ATTACK, FIGHT